Fence Panel Removal and Yard Waste Pickup
Old fence sections pile up fast after a yard project or storm damage. We haul away wood pickets, vinyl panels, chain-link runs, and leaning posts so your property line stays clear. Share the item count and a few photos, and our crew handles the heavy lifting and loading.
Why Book This Pickup
Fence panels are bulky, splintery, and awkward to move alone. Our crew handles the volume, the loading, and the disposal routing so you skip the mess.
Heavy lifting handled
We lift, carry, and load stacked fence sections and posts so you avoid the awkward volume and the splinters.
Full section cleanup
We clear panels, rails, and loose hardware from the fence line so the work area looks finished when we leave.
Sorted disposal routing
We route recyclable material when practical based on condition and available local options, so more stays out of the trash.
When People Book Fence Panel Removal
Most requests come after a fence replacement, a wind or storm knockdown, a rot or termite issue, or a property cleanout. Some are single leaning panels; others are a full perimeter run stacked along the driveway. Whether it is one section or a large pile, we plan the pickup around item count, weight, and how the material was stacked.
Fence Panel Types We Take
We accept most residential and commercial fence materials as non-hazardous junk. Sections can be intact, broken, or already pulled from the ground. Disassembly may be needed for oversized runs still joined together.
Wood fence panels
Cedar, pine, and pressure-treated pickets, privacy panels, lattice, and split rail, including broken or rotted sections.
Vinyl fence panels
Vinyl privacy and picket panels, rails, and caps that have cracked, faded, or come down during a replacement.
Chain-link fencing
Chain-link mesh rolls, top rails, tension bars, and fabric pulled from posts or already bundled for pickup.
Metal and iron sections
Ornamental iron, aluminum, and welded metal panels, plus loose brackets and hardware from disassembled fence lines.
Posts and gates
Wood and metal posts, gate frames, and hinged sections; concrete footings add weight, so flag them for the quote.
What Affects Your Quote
Fence work varies widely, so a few details help us estimate accurately. The main drivers are how much material there is, how heavy it runs, and how far the crew has to carry it.
Volume and item count
The number of panels, rails, and posts sets the truck space needed and drives most of the estimate.
Weight and material
Pressure-treated wood, wet lumber, iron, and attached concrete footings weigh far more than dry pickets or vinyl.
Carry distance and access
Long walks from a back fence line, tight gates, and narrow side yards add crew time to the load.
Disassembly needed
Panels still bolted to posts or set in footings may need disassembly, which affects the time on site.
Disposal routing
Sorting recyclable metal or wood versus mixed debris influences the disposal plan and the total crew time.
Pickup Options
Choose the option that matches how the material is staged. If you are not sure, describe the setup and we will suggest the easiest approach for your property.
In-home pickup
For panels stored in a garage, basement, or shed, our crew carries them out through doorways and hallways for you.
Curbside or outdoor pickup
Stack sections at the curb, driveway, or edge of the yard, and we load straight from the outdoor pile.
Multi-item pickup
Combine fence panels with other yard waste or cleanout junk in one visit to make better use of truck space.
How to Prep for Pickup
A little prep speeds up the visit and keeps the quote accurate. Focus on clearing the path, staging the material, and flagging anything heavy or fragile before we arrive.
Clear the walkways
Open gates and clear the route from the fence line to the truck so the crew can carry sections safely.
Stack the sections
Group panels, rails, and posts together and pull loose nails or screws when you can to reduce snag hazards.
Flag heavy pieces
Note posts still set in concrete, wet lumber, or iron sections so we plan extra hands and lifting time.
Protect fragile surfaces
Point out delicate patios, turf, or fresh landscaping along the carry path so we can work around them.
Disposal and Recycling Notes
We keep usable material out of the landfill whenever it makes sense. Clean metal like chain-link and iron often has recycling value, and untreated wood may be recyclable based on condition and available local options. Pressure-treated lumber and mixed debris are handled as non-hazardous junk. We cannot accept fuel, chemicals, asbestos siding, or other hazardous materials attached to a fence line.
How the Process Works
Booking is simple and built around your fence project. Give us the details, confirm access, and we handle the load and haul away on the day of pickup.
Send item details
Tell us the panel type, rough item count, and whether posts are still set in the ground.
Share photos
Snap a few pictures of the stacked material and the carry path so we can size the job.
Confirm access
Let us know about gates, stairs, tight side yards, or long carry distances from the fence line.
Review quote
We estimate based on volume, weight, access, and disassembly, then you confirm the pickup that works.
Pickup and haul away
Our crew loads the panels, sweeps loose hardware, and hauls everything off for disposal routing.
Frequently Asked Questions
Do you remove fence posts set in concrete?
Yes, we can haul posts and their concrete footings, but flag them ahead of time. The added weight and any digging affect crew time and your quote.
Can you handle a full perimeter fence tear-out?
We haul away large runs of panels, rails, and posts. If sections are still joined, disassembly may be needed, which we factor into the estimate and crew time.
What fence materials do you accept?
We take wood, vinyl, chain-link, aluminum, and iron sections as non-hazardous junk. We cannot accept asbestos siding, chemicals, or hazardous materials attached to the fence.
How should I stage panels before pickup?
Stack sections near the curb or driveway with a clear path, remove loose nails when possible, and group posts and hardware together to speed loading.
Do you recycle old fencing?
We route recyclable metal and untreated wood when practical, based on condition and available local options. Outcomes vary, so we cannot promise a specific result.
Related Pages
Ready to Clear the Fence Line?
Send a few photos and the item count, and the EZ Hauling Services crew will handle the heavy lifting, loading, and disposal routing. Book Fence Panel Removal and get your yard back to clean.